Common size:
Width: 1cm, 1.2cm, 1.5cm, 2cm, 2.5cm, 5cm Length: 3m, 5m, 10m
Application range:
Cut the luminous film into different shapes, suitable for use in the following places
1. Marking position:
Surfaces pasted in the following positions, such as electrical switches, remote control panels, wall switches, plugs, sockets, locks, flashlights, door handles, handrails, fire extinguishing equipment, fire alarms, life-saving appliances, etc., can mark their existence. location, easy to use;
2. Safety signs: Adhering to the following positions can play a role as a safety warning, such as emergency evacuation passages, subway stations, underground passages, civil air defense projects, karaoke halls, dance halls, cinemas, supermarkets, hospitals, railway stations, airports, docks Wait.
Precautions when using:
1. It should be constructed on a flat surface, and the construction temperature should be 10~40ºC.
2. The light-emitting film can be cut into various shapes and directly attached to a place (such as telephones, switches, etc.) to play a decorative and instructional role.
3. Silk-screen patterns and characters on the surface of the luminescent film form the substrate to emit light.
4. When sticking to the surface of the object, the surface of the object should be cleaned first, and there should be no oil, dust, etc. on the surface.
5. The luminescent film has a certain thermal expansion and cold shrinkage. The luminescent film after slicing cannot be
placed arbitrarily. It should be clamped or placed under heavy pressure to prevent deformation and curling.
6. When using, remove the release paper on the back of the luminescent film, and apply a certain pressure to the luminescent film to flatly stick it on the surface of the treated object, paying attention to the corners.