Jdy-24m Bluetooth 5.0 Mesh Zigbee Module BLE Bluetooth BLE Master Slave Through The Bluetooth Mesh

• Usage: Server
• Type: Wireless
• Support Network: Ethernet
• Model NO.: JDY-24M
• Information content: Data
• Condition: New
• Transport Package: PP Bag
• Trademark: Sunhokey
• Origin: China
• Production Capacity: 100000

Product Description

1.The products introduction

 JDY-24 m networking Bluetooth function supports master-slave transparent transmission, iBeacon,BLE probe, iBeacon detection, MESH networking, MESH networking the maximum number of MESH networking supports 65535 device networking, using multi-hop wireless anti-collision technology, network communication speed supports 50 ms to send 17 bytes of data, single module supports routing node and terminal node, routing node supports data relay (does not support low power consumption), the terminal node supports low power consumption (automatically sleep after the data is sent by pressing the button). Generally, JDY-24M networking only needs to configure the network NETID and short circuit address, the module will automatically network, when the networking module communicates with the APP, it is equivalent to transparent transmission, which greatly facilitates users to develop apps compatible with old products.

2.Product characteristics

1: supports transparent data transmission with mobile phone (IOS, ANDROID)APP (working current is about 1mA)

2: Support Module and module master-slave high-speed transparent transmission

3: support iBeacon function (ultra-low power consumption)

4: support iBeacon probe function

5: support BLE Bluetooth probe function

6: supports multi-link slave mode. Multi-link slave can connect to multiple mobile phones and pass through at the same time

7: support Bluetooth MESH (networking serial port data communication, output IO control, input key-press)

8:MESH network sends data to support response and no response communication

9: The network remote control

3.Technical specifications

type		specifications and parameters
working voltage		1.9-3.6V
operating temperature		-40 - 85 ° C
the maximum transmit power		+4 dbm
antenna		the PCB antenna
the reception sensitivity		-96 dbm
SMT welding temperature		<260 ºC
communication Interface		UART
average Current	non- MESH mode wake-up (transparent transmission) current	1mA around
	non- MESH mode slave has broadcast light sleep	within 200uA (related to broadcast interval)
	MESH mode wake-up communication current	4mA around
	the MESH mode sleep current	3uA
	Deep Sleep mode	3 uA

 

4.The factory default configuration

sequence	function	parameter	AT Command
1	the baud rate	115200	AT+BAUD8
2	module short address	MAC address2 byte
3	network ID NUMBER	1189	AT+NETID1189
4	K1 target short address	FFFF	AT+KEY1,FFFF,1,1
5	K2 target short address	FFFF	AT+KEY2,FFFF21
6	K3 target short address	FFFF	AT+KEY3,FFFF31
7	K4 target short address	FFFF	AT+KEY4,FFFF41
8	K5 target short address	FFFF	AT+KEY5,FFFF51
9	the APP password switch	off	AT+ TYPE0
10	APP connection password	1234	AT+ PIN1234
11	broadcast name	JDY-24 M	AT+NAMEJDY-24M

serial port AT instruction set

JDY-24M module serial port to send rn must be added to the AT command

sequence	instructions	function	the default
1	AT	test commands	-
2	AT+RESET	reset	-
3	AT+VERSION	firmware version	-
4	AT+LADDR	read MAC address	-
5	AT+NAME	broadcast name read and write	JDY-24M
6	AT+PIN	connection password settings	1234
7	AT+TYPE	whether to open the password connection method	0
8	AT+BAUD	the baud rate	115200
9	AT+DISC	disconnected	-
10	AT+STAT	read the connection status	0
11	AT+STARTEN	boot sleep settings	1
12	AT+ADVINT	the broadcast interval	1
13	AT+POWR	transmission power	3
14	AT+ROLE	sets the operating mode	0
15	AT+SLEEP	A sleep instruction	-
16	AT+DEFAULT	restore factory configuration	-
17	AT+INQ	host Search slave broadcast	-
18	AT+STOP	stop Broadcasting	-
19	AT+CONN	connected to the scan list ID NUMBER	-
20	AT+CONA	instructions MAC address	-
21	AT+BAND	binding from machine MAC address	-
22	AT+CLRBAND	clear binding	-
23	AT+SRBAND	connect the slave with the strongest peripheral signal	-
24	AT+MESH	MESH-sends the data	-
25	AT+KEY	key parameters	-
26	AT+NETID	networking the ID NUMBER of the configuration	1189
27	AT+MADDR	networking short address	the MAC address after two
28	AT+MCLSS	the networking device type	0 (router)
29	AT+FRIEND	add private friends MAC address	000000000000
30	AT+CLRFRIEND	clear the private password friends
31	AT+FRTYPE	friend types	0
32	AT+IBUUID	iBeacon UUID that IDENTIFIES the configuration
33	AT+MAJOR	iBeacon MAJOR configuration	000A
34	AT+MINOR	iBeacon of MINOR configuration	0007
35	AT+IBSING	iBeacon SING configuration
36	AT+ENLOG	the serial output status switch	1 (on)

MESH short address table ( MADDR)

address	function	description
0XFFFF	broadcast address	the device short address cannot be configured0XFFFF
0X0002 to0XFF00	unicast address	device address (users can set short addresses within this range)
0X0001	machine center address	machine center
0xFF01 to0XFFFE	system address	generally are not recommended to use

note: a short address is equivalent to a device in the network. ID no

broadcast Data, which can be received by all devices in the networ

unicast data. Only devices with specified addresses can receive the data.