ESP32C3SuperMini Development Board
IoT mini development board based on Espressif ESP32-C3 WiFi/Bluetooth dual-mode chip
View:
ESP32C3SuperMini is an IoT mini development board based on Espressif ESP32-C3 WiFi/Bluetooth dual-mode chip. ESP32-C3 is a 32-bit RISC-V CPU that includes an FPU (floating point unit) for 32-bit single-precision operations and has powerful computing power. It has excellent RF performance and supports IEEE 802.11 b/g/n WiFi and Bluetooth 5 (LE) protocols. The board comes with an external antenna to enhance the signal strength of wireless applications. It also has a small and exquisite appearance combined with a single-sided surface mount design. It is equipped with a rich interface, with 11 digital I/Os that can be used as PWM pins and 4 analog I/Os that can be used as ADC pins. It supports four serial interfaces such as UART, I2C and SPI. There is also a small reset button and a bootloader mode button on the board.
Combining the above features, ESP32C3SuperMini is positioned as a high-performance, low-power, and cost-effective IoT mini development board suitable for low-power IoT applications and wireless wearable applications.
Parameters
Powerful CPU: ESP32-C3, 32-bit RISC-V single-core processor, running at up to 160MHz
WiFi: 802.11b/g/n protocol, 2.4GHz, supports Station mode, SoftAP mode, SoftAP+Station mode, promiscuous mode
Bluetooth: Bluetooth 5.0
Ultra-low power consumption: deep sleep power consumption is about 43μA
Rich board resources: 400KB SRAM, 384KB ROM built-in 4MB Flash
Chip model: ESP32C3FN4
Size: as small as a thumb (22.52*18mm) classic shape, suitable for wearable devices and small projects
Security function: support AES-128/256, hash, RSA, HMAC, digital signature and secure boot encryption hardware accelerator
Rich interfaces: 1xI2C, 1xSPI, 2xUART, 11xGPIO (PWM), 4xADC
Single-sided components, surface mount design
Onboard blue LED: GPIO8 pin
External power supply:
If external power supply is needed, just connect the positive pole of the external power supply to the 5V position and GND to the negative pole. (Supports 3.3~6V power supply). Remember that when connecting the external power supply, you cannot connect to the USB. You can only choose one between USB and external power supply.
Packing&Shipping
1. pls Confirm your Address carefully once you make the order, if package returned or have some problems caused by your wrong information, you need bear the responsbility.
2. If your address out of shipping company's service, you willneed pay remote fees. we will contact you before we delivered the parcel.
3. Delivery time maybe uncontrolled during the holiday or badweather, if you have not received parcel over scheduled time, pls contact us promptly.
Audited Supplier 
){kind=link}