Banana Pi Bpi-M4 Zero Development Board 2GB/4GB RAM

• Type: Combining Rigid Circuit Board
• Dielectric: SIC
• Material: Aluminum Covered Copper Foil Layer
• Model NO.: BPI-M4 Zero
• Application: Medical Instruments
• Mechanical Rigid: Rigid
• Processing Technology: Electrolytic Foil
• Base Material: Copper
• Insulation Materials: Metal Composite Materials
• Brand: Banana Pi
• Item: Development Board
• Model: Banana Pi M4 Zero
• CPU: Allwinner H618
• GPU: Arm Mali G31 GPU
• RAM: 2GB/4GB Lpddr4
• Storage: 8GB/32GB Emmc
• SD Card: Microsd Card Slot, Sdio3.0
• Wireelss: 2.4G/5g WiFi and Bluetooth 4.2
• Power: 5V3a Via USB Type-C
• Size: 65*30mm
• Transport Package: Box
• Specification: 65*30mm
• Trademark: BPI
• Origin: Cn
• Production Capacity: 1000PCS/Month

Product Description

Banana Pi BPI-M4 Zero 2GB/4GB RAM Compatible with RPI Zero

 

Banana Pi BPI-M4 Zero with Allwinner H618 chip design with 2G/4G RAM

• Allwinner H618, Quad-core ARM Cortex™-A53 processor
• ARM Mali G31 GPU
• 2.4G/5G WIFI & Bluetooth 4.2
• 2G/4G LPDDR4 RAM
• 8G/32G eMMC flash memory
• 1x USB2.0 Type-C OTG, 5V power supply
• 1x USB2.0 Type-C
• 1x miniHDMI 2.0a
• 1x 24-pin FPC connector
• 1x USB2.0
• 1x 100Mbps Ethernet

  

Product Introduction:

Banana Pi BPI-M4 Zero is the successor model of BPI-M2 Zero. The SOC is upgraded to Allwinner  H618 quad-core A53 . The memory is upgraded to 2G  LPDDR4, and 8G eMMC onboard . It supports 5G WiFi and BT, and the USB interface has also been upgraded to type-C.

It has the same form factor and 40-pin connector as the Raspberry Pi Zero W, and it will fit most Zero W cases and accessories.

Hardware Interface:
 

Hardware Spec:

CPU	Allwinner H618, Quad-core ARM Cortex™-A53 processor, 64-bit, up to 1.5GHz
GPU	ARM Mali G31 GPU
Memory	2GB/4GB LPDDR4
Storage	8G/32G eMMC flash
SD card	MicroSD card slot, SDIO3.0
Wireless	2.4G/5G WiFi and Bluetooth 4.2
HDMI	1x miniHDMI 2.0a (up to 4K@60Hz with HDR10, CEC, DDC, SCDC), HDMI digital Audio output
USB	1x USB2.0 Type-C HOST, 1x USB2.0 Type-C OTG
40-pin header	28 pins GPIO and Power (+5V, +3.3V and GND)
	UART, SPI, TWI/I²C, PWM, PCM/I²S
24-pin FPC	0.5mm pitch FPC connector, 1x USB2.0, 1x IR, 1x 100Mbps Ethernet
	9 pins GPIO, UART,TWI/I²C, PWM, PCM/I²S
Buttons	Reset, FEL
LED	Power Status and Activity status
Power	5V@3A via USB Type-C
Size	65mm × 30mm

 

 

Packing&Shipping

1. pls Confirm your Address carefully once you make the order, if package returned or have some problems caused by your wrong information, you need bear the responsbility.
2. If your address out of shipping company's service, you willneed pay remote fees. we will contact you before we delivered the parcel.
3. Delivery time maybe uncontrolled during the holiday or badweather, if you have not received parcel over scheduled time, pls contact us promptly.