| Metal Coating: | Copper |
|---|---|
| Mode of Production: | SMT |
| Layers: | Multilayer |
|
Still deciding? Get samples of US$ 25/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
CPU:ARM Cortex-A5 32-bit
GPU:Separate graphic processor, Vivante's GC860, Support OpenGLES1.1/2.0, Support OpenVG1.4, Support DirectFB, Support GDI/DirecShow, 30M Triangle/s 250M Pixel/s
RAM:Integrated 256MB LPDDR2 SDRAM
Onboard storage: TE card / integrated 512MB 8 bit 1.8V 4K SLC Nand Flash
Onboard Wifi + Bluetooth: RDA5991. WIFI+BT
2G module: quad-band single card GSMIGPRS dedicated accelerator SIM card
Video input: camera module with CSI
Video output: LCD
Audio input 3.5 mm audio interface, MIC
Audio output: 3.5 mm audio interface, FM, SPEAK (optional)
Onboard WIFI: AP6212. IEEE 802.11 b/a/n.BT4.2
Power supply: USB OTG power supply, battery powered (optional)
Low-level peripheral: 40 Pins connector, compatible with Raspberry Pi B+
Button: Power button (SW602)
USB 2.0 interface: one USB 2.0 HOST, one USB 2.0 OTG
GPIO (1x3) pin: UART, ground
LED light: power light
Supported operating systems: Android. Ubuntu. Debian and other operating systems
At 3.5 x 2.3 x 0.76 inches (88 x 58 x 19.5 mm) and 0.1 pounds (46 grams), the Pi 4 is thin enough to fit in your pocket and light enough to carry anywhere. The board is durable enough to probably survive rolling around in your bag, but we recommend sticking it in something protective, mostly to protect the pins. However, during testing, I always used the board bare on my desk and I carried it back and forth between work and home many times by simply putting it in a cardboard box with no padding or static bag.
Unfortunately, if you want a case, you can't use one that's been designed for any previous Raspberry Pi. The Raspberry Pi 3 B / 3 B+ have almost the same dimensions, but the port layout has changed just enough to make the Pi 4 B incompatible. Where prior Pis had a single, full-size HDMI port, the dual micro HDMI connectors on the Pi 4 jut out more and so don't line up with the holes on anything that was designed for the Pi 3 B.
The Raspberry Pi 4 covers more than just the basics when it comes to ports. The right side has four USB Type-A connections, two of which are USB 3.0. There's also a full-size, Gigabit Ethernet port for wired connections there. The bottom edge has a 3.5mm audio jack, two micro HDMI ports and the USB Type-C charging port. On the left side, you'll find the microSD card reader. And on the top surface of the board, you'll see ribbon connectors for the Camera Serial Interface (CSI) and Display Serial Interface (DSI), which provide dedicated connections to Raspberry Pi's own camera and screen (or compatible accessories). Of course, you can connect a camera to a USB port as well and there are a couple of more common ways, including the micro HDMI ports, to output to a screen.
No matter how fast your processor, RAM and GPU are, if your storage is slow, everyday tasks like opening apps and files will be laggy. Like all Raspberry Pis, the 4 B's primary storage device is its microSD card reader, which is convenient but a bit constrained. According to the Pi Foundation, the 4 B has a top transfer rate of 50 MBps, which is double the speed of the reader on the 3 B+. There's no known limit on capacity.
With a more power-hungry processor and the need for at least a 5-volt, 3-amp power adapter, the Pi 4 should be expected to consume more power than its predecessors.
At idle, the Pi 4 B draws 3.4 watts, which is just 17 percent more than the 3 B+. Under load, that number jumps to 7.6 watts, but that's still only 19 percent more juice than its direct predecessor. If you want the lowest-power Pi, performance be damned, then go for the Pi Zero W, which consumes a mere 0.8 watts at idle and 1.6 watts under load.
Yes, this board gets warm, warmer than its predecessor. Thermal images mirror what we experienced; the areas of the board near the CPU get really warm, not just the top of the processor itself. The Pi 4 board reaches a toasty 74.5 degrees Celsius (166 degrees Fahrenheit).
New CPU, RAM
The Raspberry Pi 4 has similar design and dimensions to its predecessors, but it's an all-new platform, powered by a new processor, the Broadcom BCM2711B0. Since the first Pi in 2012, all Pis have used 40nm SoCs, but this new chip is based on a 28nm process and, instead of the older Cortex-A53 microarchitecture, it uses Cortex-A72. The BCM2711B0 in the Raspberry Pi 4 has four cores and is clocked at 1.5 GHz, which at first blush, doesn't seem much quicker than the quad-core, 1.4 GHz BCM2837B0 in the Raspberry Pi 3B+.
However, Cortex A72 has 15-instruction pipeline depth, compared to just 8 on the older model, and it also provides out-of-order execution so it's not waiting for the output of one process to start on another. So, even at the same clock speed (and the BCM2711B0 is based on a smaller process node), Cortex-A72 processors will be significantly faster and use more power than their A53-powered ancestors.
For example, on the Linpack benchmark, which measures overall compute power, the Pi 4 absolutely whooped the Pi 3 B+ in all three tests. On the all-important single precision (SP) test, the Pi 4, scored 925 as compared to the 3 B+'s mark of 224, a boost of 413 percent.
On the Sysbench CPU test, the Pi 4 B was capable of performing 394 events per second as compared to 263 for the Pi 3 B+. That's a difference of 50 percent.
The RAM is also quite a bit quicker, going from 1GB of DDR2 RAM operating on the Pi 3B+ to up to 4GB of DDR4 RAM. In addition to the increased bandwidth, having more memory is a huge deal, particularly for web surfing.
Both the CPU and the RAM are implicated when you do file compression. When zipping a file in multithreaded mode, the Pi 4 B is 37 percent quicker than its predecessor, but it's far stronger in single-threaded, eclipsing the 3 B+ by 60 percent.
The GPU is getting a nice boost too. It moves from a Broadcom VideoCore IV that operated at a core clock speed of 400 MHz to a VideoCore VI that's set at 500 MHz. The new architecture allows it to output to a display at up to 4K resolution with a rate of 60 fps or to support dual monitors at up to 4K 30 Hz.
While we wish we could have tried some of the more resource-intensive emulators in Retropie in time for this review, there wasn't a Pi 4-compatible version at launch. However, the OpenArena Benchmark, which measures frame rates in a game that's a a clone of Quake III Arena, did run.
At 720p resolution, the Pi 4 was the only Raspberry Pi capable of delivering smooth frame rates. Yes, you can play on the Pi 3, 3 A+ or 3 B+, but all three deliver rates between 27 and 28 fps as compared to 41.4 fps on the Pi 4
It's not enough for a serious burn, but kids especially should be sure to pick up the Pi by its sides only. The top surface of the Pi 3 B+ is much cooler, maxing out at 62.5 degrees Celsius (144.6 degrees Fahrenheit).
As with any modern computer, if you push the system too hard and the CPU or GPU get too hot, the computer will throttle down to avoid damage.
The Raspberry Pi 4 represents a giant leap forward, not only for the Raspberry Pi, but for single-board computing. For the first time, it's realistic to use your Pi as a secondary or backup PC (or perhaps a kids' first PC). However, the larger real benefit will come not from folks who use Raspberry Pi 4s in lieu of x86 PCs, but from all the innovators who harness the system's enhanced performance, I/O and graphics to create new iOT devices, media servers and robots. Kids building Pi projects in school will also have a world of new learning possibilities.
){kind=link}